Getting Started With Switch Management; System Requirements - NETGEAR ProSafe GS108 User Manual

Gigabit smart switch
Hide thumbs Also See for ProSafe GS108:
Table of Contents

Advertisement

Getting Started with Switch Management

This section provides an overview of switch management, including the methods you can choose
to start managing your NETGEAR GS108T Gigabit Smart Switch. It also leads you through the
steps necessary to get started, using the SmartWizard Discovery utility. The section includes this
information under the following headings:

"System Requirements"

"Switch Management Interface"
"Network with a DHCP Server"
"Network without a DHCP Server"
"Web Access"
"Additional Utilities"
System Requirements
The following hardware and software facilities are required to run the applications described in
this manual:
Network facilities:
Ethernet network with or without DHCP server as appropriate
Ethernet cable to connect the switch to a PC
For running the SmartWizard Discovery utility and local or remote Web Management:
IBM-type PC with CD drive: RAM size and disk specification are not critical
OS software: Microsoft Windows Vista, Windows XP, or Windows 2000
Desktop computer running Microsoft Internet Explorer 5.0 or later or Netscape Navigator
6.0 or later, or equivalent
Note: For complete hardware installation instructions, refer to the GS108T Smart Switch
Hardware Installation Guide included on your Resource CD, or go to
http://www.netgear.com/support.
v1.0, May 2007
Chapter 1
1-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs108t-100nasGs108t

Table of Contents