Fametech POS-1000B-P Quick Installation Manual


Specifications
Model Name
Processor Intel® Bay Trail-D J1900 2.0G up to 2.4G, 2M Cache
Memory
Storage
LCD Panel
Touch Panel
Speaker
I/O Expansion
USB
LAN
COM
LPT
VGA
Cash Drawer 1 x RJ11 port supports 2 cash drawer with 12V or 24V by jumper
DC Power Out
DC Power In
Power Management
Power Adapter
Mechanical & Environmental
Dust and Water
Tilt Adjustment
Dimension
Weight
Certification
POS Ready 7/Windows Embedded 8.1 Industry/Windows 10 IoT/Linux
Operation System
Operation Condition 0°C to +40°C / 20 to 80% without condensation (Equipped with HDD)
Storage Condition
Optional Accessories
8" (800 x 600), 9.7" (1024 x 768), 10.1" (1280 x 1080) and 15" (1024 x
2nd Display
Customer Display
MSR
MSR - Comply with ISO 7811/JSII and Three Track
Combo Card Reader
i-Button
VESA Bracket
POS-1000B-P
1 x DDR3L SODIMM, up to 8GB
1 x 2.5" SATA BAY (Option : m-SATA)
15-inch TFT LCD with LED Backlight
1024 (W) RGB x 768 (H)
True-Flat Projected Capacitive Multi Touch
True-Flat 5-wire Resistive Touch
1 x 2W High Quality Speaker
6 x USB Type A (5 x USB 2.0 and 1 x USB 3.0)
1 x RJ45 10/100/1000Mbps Giga Ethernet
3 x COM (DB9) and 1 x COM (USB), w/ RI/5V/12V
1 x DB25 Parallel Port (Option)
1 x DB-15 VGA Port
1 x +12V Power Out
1 x Standard Mini-DIN 4PIN type
12V@5.0A, 60W Adapter
IP65 on Front Panel
15° ~ 85 °
355 (W) x 303 (H) x 205 (D) mm
5 kg
CE/FCC/LVD
(Ubuntu)
-20°C to +55°C / 20 to 85% without condensation
768) LCD Display
Option : PCAP Touch Panel
VFD and LCD Customer Display
Comply with ISO 7811 and Three Track support
RFID - Comply Mifare, ISO14443AB-4 and Felica
Dallas i-button Reader
VESA-Compatible, 75 x 75 (mm)
POS-1000B-P
Fanless Full-Flat POS Terminal
Quick Installation Guide
IMPORTANT SAFETY INFORMATION
 Read following instructions carefully.
 Use only parts, especially power adapter, recommended by the manufacturer;
unapproved parts may be hazardous.
 Make sure that the voltage applied to the power outlet is within the specified range
(100VAC ~240VAC).
Improper power source voltage range will cause damage.

Power off the system and remove the power adapter while cleaning the system.
 Before powering on the system, make sure all the peripherals are
firmly installed.