Warranty - Agilent Technologies InfinityLab LC Series User Manual

Notices
Document Information
The information in this document also
applies to 1260 Infinity II and 1290 In-
finity II modules.
Document No: SD-29000218 Rev. F
Edition: 10/2024
Copyright
© Agilent Technologies, Inc.
2016-2024
No part of this manual may be repro-
duced in any form or by any means (in-
cluding electronic storage and retrieval
or translation into a foreign language)
without prior agreement and written
consent from Agilent Technologies,
Inc. as governed by United States and
international copyright laws.
Agilent Technologies
Hewlett-Packard-Strasse 8
76337 Waldbronn, Germany

Warranty

The material contained in this docu-
ment is provided "as is," and is subject
to being changed, without notice, in fu-
ture editions. Further, to the maximum
extent permitted by applicable law, Agi-
lent disclaims all warranties, either ex-
press or implied, with regard to this
manual and any information contained
herein, including but not limited to the
implied warranties of merchantability
and fitness for a particular purpose.
Agilent shall not be liable for errors or
for incidental or consequential dam-
ages in connection with the furnishing,
use, or performance of this document
or of any information contained herein.
Should Agilent and the user have a
separate written agreement with war-
ranty terms covering the material in
this document that conflict with these
terms, the warranty terms in the sepa-
rate agreement shall control.
Technology Licenses
The hardware and/or software de-
scribed in this document are furnished
under a license and may be used or
copied only in accordance with the
terms of such license.
Restricted Rights Legend
U.S. Government Restricted Rights.
Software and technical data rights
granted to the federal government in-
clude only those rights customarily
provided to end user customers. Agi-
lent provides this customary commer-
cial license in Software and technical
data pursuant to FAR 12.211 (Techni-
cal Data) and 12.212 (Computer Soft-
ware) and, for the Department of De-
fense, DFARS 252.227-7015 (Technical
Data - Commercial Items) and DFARS
227.7202-3 (Rights in Commercial
Computer Software or Computer Soft-
ware Documentation).
Safety Notices
CAUTION
A CAUTION notice denotes a haz-
ard. It calls attention to an operat-
ing procedure, practice, or the like
that, if not correctly performed or
adhered to, could result in damage
to the product or loss of important
data. Do not proceed beyond a
CAUTION notice until the indicated
conditions are fully understood
and met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an op-
erating procedure, practice, or the
like that, if not correctly per-
formed or adhered to, could result
in personal injury or death. Do not
proceed beyond a WARNING no-
tice until the indicated conditions
are fully understood and met.