Using Open Source Software; General Information - insys icom MIRO Installation And User Manual

Using Open Source Software

4 Using Open Source Software
4.1

General Information

Our product MIRO contains, amongst others, so-called open-source software that
is provided by third parties and has been published for free public use. The open-
source software is subject to special open-source software licenses and the copy-
right of third parties. Basically, each customer can use the open-source software
freely in compliance with the licensing terms of the respective producers. The
rights of the customer to use the open-source software beyond the purpose of our
product are regulated in detail by the respective concerned open-source software
licenses. The customer use the open-source software freely, as provided in the re-
spective effective license, beyond the purpose that the open-source software gets
in our product. In case there is a contradiction between the licensing terms for our
product and the respective open-source software license, the respective relevant
open-source software license takes priority over our licensing terms, as far as the
respective open-source software is concerned by this.
The use of the used open-source software is possible free of charge. We do not de-
mand usage fees or any comparable fees for the use of the open-source software
contained in our product. The use of the open-source software in our product by
the customer is not part of the earnings we achieve with the contractual compen-
sation.
All open-source software programs contained in our product can be taken from the
available list. The most important open-source software licenses are listed in the Li-
censes section at the end of this publication.
As far as programs contained in our product are subject to the GNU General Public
License (GPL), GNU Lesser General Public License (LGPL), Clarified Artistic License
or another open-source software license, which regulates that the source code must
be made available, and if this software is not already delivered in source code on a
data carrier with our product, we will send you this at any time upon request. If it is
required to send this on a data carrier, the sending will be made against payment of a
cost compensation of € 10,00. Our offer to send the source code upon request
ceases automatically 3 years after delivery of our product to the customer. Requests
must be directed to the following address, if possible under specification of the serial
number:
INSYS icom GmbH
Hermann-Köhl-Str. 22
93049 Regensburg
Phone +49 941 58692 0
Fax +49 941 58692 45
E-mail: support@insys-icom.de
16
MIRO