Advertisement
ENGLISH
Quick Installation Guide
EBW-W
These short operating instructions apply for the following devices of INSYS icom:
▪
EBW-W100
It is intended for a quick commissioning by the operator. Refer to the associated manual for further information.
This and other associated manuals can be found on our website in the menu Support > Documentation and
Downloads. Scan the QR code above or enter the URL into your web browser.
Defects liability terms
A use other than the intended use, an ignorance of the safety instructions and the documentation, the use of insufficiently qualifi ed
personnel as well as unauthorised modifications exclude the liability of the manufacturer for damages resulting from this. Th e liability of the
manufacturer ceases to exist.
In tended Use
The product may only be used for the purposes specified in the function overview of the manual. In addition, it may be used f or the
following purposes:
▪ Usage and mounting in an industrial cabinet.
▪ Switching and data transmission functions in machines according to the machine directive 2006/42/EC.
▪ Usage as data transmission device, e.g. for a PLC.
The product may n ot be used for the following purposes and used or operated under the following conditions:
▪ Use, control, switching and data transmission in machines or systems in explosive atmospheres.
▪ Controlling, switching and data transmission of machines, which may involve risks to life and limb due to their functions or when a
breakdown occurs.
Technical Boundaries
Max. line length for antennas, power supplies, inputs and outputs as well as other signals: 30 m
Cable cross-section: 0.25 ... 2.5 mm², flexible lines require end sleeves
Support
If you need further support, please contact your sales partner or INSYS icom support. You can contact our support department via e-mail
under support@insys-icom.de.
Technical Data
The product is only intended for the use within the permissible technical limits specified in the data sheets. These limits m ust be observed.
Operating voltage
Power consumption
WLAN
10 V ... 48 V DC (±20%)
typ. 2.0 W, max. 3.0 W
2.4 GHz; 802.11b/g/n
www.insys-icom.com/manual
Real-time clock (RTC) buffer time
Temperature range
Maximum permissible humidity
IP rating
typ. 2 days
-30 °C ... 70 °C
(85 °C restricted)
95% non-condensing
Housing IP40
Connectors IP20
www.insys-icom.com
Advertisement
Table of Contents
Related Manuals for insys icom EBW-W
Summary of Contents for insys icom EBW-W
- Page 1 Max. line length for antennas, power supplies, inputs and outputs as well as other signals: 30 m Cable cross-section: 0.25 … 2.5 mm², flexible lines require end sleeves Support If you need further support, please contact your sales partner or INSYS icom support. You can contact our support department via e-mail under support@insys-icom.de. Technical Data The product is only intended for the use within the permissible technical limits specified in the data sheets.
- Page 2 ENGLISH Quick Installation Guide EBW-W Router connection Connect antenna Connect supply voltage (10 V … 48 V DC (±20%)) to the terminals 10…48 V and GND Connect router (LAN 1) to the configuration PC via Ethernet cable LAN settings of configurations PC (Windows 7) ...
- Page 3 ENGLISH Quick Installation Guide EBW-W Integration into a WLAN network If the router is in delivery state or has been reset to factory defaults, the configuration option Fast start after reset to default settings appears upon login. Activate DHCP...
- Page 4 ENGLISH Quick Installation Guide EBW-W IP Address in Local Network The IP address of the router in the local network does only have to be changed, if the IP address is already used or a different address range is required.
Need help?
Do you have a question about the EBW-W and is the answer not in the manual?
Questions and answers