2.3 General notes of caution
• The devices may only be operated when fully assembled.
Caution /
Notes
• In hazardous areas, the devices must not be wiped or cleaned
• The device must be switched off immediately if it is likely that it
• General statutory requirements or health and safety rules and
• Users must not open the device.
• Users must not make any changes to the device. Components
• Ensure safe handling with firm footing and sufficient room for
• If the enclosure is in any way damaged the device must be
• In accordance with IEC 60079-19 and IEC 60079-17, operators
• Do not insert any sharp objects into the enclosure or any other
• The device and any accessories must be properly disposed of,
with a dry cloth.
can no longer be operated safely as a result of damaging
impact or general peculiarities (such as ingress of water or
other fluids, temperatures outside of the specified range, etc.).
accident prevention guidelines and environmental laws must
be adhered to (e.g. the German Occupational Health and
Safety regulation).
may not be exchanged or replaced. If non-specified
components are used, explosion protection is no longer
guaranteed.
movement.
removed from the hazardous area immediately.
of electrical installation in hazardous areas are obliged to have
them serviced by qualified electricians.
openings of the handheld barcode scanner. Any openings at
the device may not be covered or blocked.
i.e. as legally specified, for example by a certified company.
5
Need help?
Do you have a question about the iSCAN X4C-2-P and is the answer not in the manual?