Epson Stylus Pro 10000 Product Support Bulletin page 66

Stylus Pro 7600/9600 Printer Service Utility
10. For the bidirectional print pattern, inspect the alignment pattern and find the best vertical alignment
pattern for the black pattern first, generally labeled as K1 (do not concern yourself with the other
patterns at this point). If you do not find an aligned value, input the closest aligned value and select
Print again.This will offset the patterns toward the center pattern (number 5) position. Once you find an
aligned pattern (5 being the best value) for black, select that value and click the Print button to reprint
the patterns for the color adjustment.
NOTE: The color patterns are an offset of black (K1), meaning that as black is being adjusted, the colors
also offset based off that adjustment, therefore black should be adjusted first. If not, printouts may not
be as expected (color shifts / ghosting).
11. Looking at the alignment sheet find the best vertical alignment pattern for the colored patterns. If
you do not find an aligned value, input the closest aligned value and select Print again. This will offset
the patterns toward the center pattern (number 5) position.
NOTE: Do not make any adjustments to Black (whichg was performed in step 10). Doing so will throw
off the color adjustment values.
12. Once you find an aligned pattern (5 being the best value) for the color, select the value and click
the Save button to save the offset adjustments values.
13. Repeat this process until you are satisfied with the alignment patterns.
14. Once completed, select Quit to exit the program.
Print Head Alignment Printer Component, Software Item, LCD Display, Printer Button
8/26/02
Page 9.