Cut Method - Epson Stylus Pro 10000 Product Support Bulletin

Stylus Pro 7600/9600 Printer Service Utility

CUT METHOD

This configuration setting selects the cutting method used for Standard paper, Thin paper, and Very Thin paper. Stan-
dard is the default selection used for the majority of media's. When a media is being cut the cutter is raised and low-
ered 3 or 4 times during each cut to insure a straight cut without pulling the media during the cutting process.
• Standard:Triple Cut with standard cut pressure.
• Thin Paper: Quadruple Cut with standard cut pressure.
• Very Thin Paper: Quadruple Cut with weak cut pressure.
The following medias require manual cutting:
Smooth Fine Art Paper
Textured Fine Art Paper
Canvas
Custom Paper Configuration
Enhanced Matte Posterboard
Somerset Velvet Fine Art Paper
Adhesive Vinyl
Heavy Weight Polyester Banner
Backlight Film
DuPont Semi Gloss Proofing
8/26/02
Page 20.