Epson Stylus Pro 10000 Product Support Bulletin page 22

EPSON
PRODUCT SUPPORT BULLETIN
Date: 6/29/2004
Bulletin #: PSB.2003.07.002A
Reference: NA
Product: Stylus Pro 7600/9600
Subject: Stylus Pro 7600/9600 Transportation and Storage Information
This bulletin was created to provide transportation and long term storage information for the Epson Stylus Pro 7600/9600 Ink Jet printers.
Transportation and Storage Preparation Information:
Transportation and Storage preparation of the Stylus Pro 7600/9600 printers can be performed in two ways depending on the
transportation or Storage requirement. This document will provide information for Transportation and Storage preparation for the
following two categories:
• Local Transportation without long term storage or the need to tilt the printer over 10 to 15 degrees during the move.
• Long Distance Transportation, Long Term Storage or situations where the printer may need to be tilted greater then 15
degrees during transportation.
This bulletin provides additional information and/or supersedes information in the earlier version of the User's Guide,
under "Preparing the Printer for Shipment" section. The instruction specify the need to contact EPSON and have a
service technician drain the inks before shipping the printer. For Local transportation this is Not a requirement.
EPSON Professional Graphics Group
Originator: RS
Authorization:
Total Pages: 4
.
Page 1