Table of Contents
Advertisement
Completely blank pages are output
Cause
The product may have loaded
more than one sheet at a time.
There may be no toner left in
the toner cartridge.
The problem may be with your
application, interface cable, or
product.
The Paper Size setting may be
incorrect.
There may be a problem with
the photoconductor unit.
What to do
Remove the paper stack and fan it. Tap
it on a flat surface to even the edges, then
reload the paper.
If the message in the LCD panel or in the
EPSON Status Monitor 3 indicates that
the amount of toner is low, replace the
toner cartridge. See "Toner Cartridge"
on page 338. You can also check the
remaining toner with the following
symbols on the Basic Settings tab in the
printer driver.
Toner low: !
Toner end: ×
Confirm the application setting and
interface connection, and print out a
status sheet. See "Printing a Status
Sheet" on page 304. If a blank page is
ejected, the problem may be with the
product. Turn off the product and
contact your dealer.
Make sure the correct paper size is set in
the Tray Menu on the control panel.
Replace the photoconductor unit. See
"Photoconductor Unit" on page 342.
Printing Problems
13
13
13
13
13
13
13
13
13
13
13
13
405
Advertisement
Table of Contents
