What to Do after Installing the Router Hardware
What to Do after Installing the Router Hardware
After you have installed the router, connect the power cable to the rear panel of the router
and the power source and then power it ON. (If the router does not power ON, proceed to
the "Troubleshooting the Router" appendix.)
Proceed to the next chapter, "Configuring the Router," for initial software configuration
information.
Note
The Cisco configuration guide and command reference publications provide
additional software configuration information. These publications are available on the
documentation CD that came with your router or you can order printed copies. Refer to the
section "Ordering Documentation" in the chapter "Overview of the Router" for ordering
information.
Installing the Router 3-21