Where To Go Next - Cisco CISCO2515-RF - 2515 Router User Manual

Console Port Connections
Your router includes an EIA/TIA-232 asynchronous serial console port (RJ-45). Cables and
adapters to connect a console terminal (an ASCII terminal or PC running terminal
emulation software) to the console port are included. To connect an ASCII terminal to the
console port, use the RJ-45-to-RJ-45 roll-over cable (looks like a telephone cable) with the
female RJ-45-to-DB-25 adapter (labeled "TERMINAL"). To connect a PC running
terminal emulation software to the console port, use the RJ-45-to-RJ-45 roll-over cable
with the female RJ-45-to-DB-9 adapter (labeled "TERMINAL"). The default parameters
for the console port are 9600 baud, 8 data bits, no parity, and 2 stop bits. The console port
does not support hardware flow control. For detailed information about installing a console
terminal, see the section "Connecting to the Console Port" in the chapter "Installing the
Router." See the appendix "Cable Specifications" for cable and port pinouts.
Auxiliary Port Connections
Your router includes an EIA/TIA-232 asynchronous serial auxiliary port (RJ-45) that
supports hardware flow control. A cable and an adapter to connect a modem to the auxiliary
port are included. To connect a modem to the auxiliary port, use the RJ-45-to-RJ-45
roll-over cable (looks like a telephone cable) with the male RJ-45-to-DB-25 adapter
(labeled "MODEM"). For detailed information about connecting devices to the auxiliary
port, see the section "Connecting a Modem to the Auxiliary Port" in the chapter "Installing
the Router." See the appendix "Cable Specifications" for cable and port pinouts.

Where to Go Next

Proceed to the next chapter, "Installing the Router," for installation instructions.
Where to Go Next
Preparing to Install the Router 2-17