Cisco CISCO2515-RF - 2515 Router User Manual page 61

Enter the enable and virtual terminal passwords:
Step 6
Enter enable password: shovel
Enter virtual terminal password: vterm1
Step 7 Press Return to accept Simple Network Management Protocol (SNMP)
management, or enter no to refuse it:
Configure SNMP Network Management? [yes]: no
In the following example, the router is configured for AppleTalk, Internet
Step 8
Protocol (IP), and Internetwork Packet Exchange (IPX). Configure the
appropriate protocols for your router:
Configure Vines? [no]:
Configure LAT? [no]:
Configure AppleTalk? [no]: yes
Multizone networks? [no]: yes
Configure DECnet? [no]:
Configure IP? [yes]:
Configure IGRP routing? [yes]:
Your IGRP autonomous system number [1]: 15
Configure CLNS? [no]:
Configure bridging? [no]:
Configure IPX? [no]: yes
Configure XNS? [no]:
Configure Apollo? [no]:
If your router includes an ISDN BRI port, enter the ISDN BRI switch type. The
Step 9
switch type appropriate for the router depends on the ISDN service provider's
equipment. Table 4-1 lists the ISDN switch types.
Enter ISDN BRI Switch Type [none]: basic-5ess
Configuring the Router for the First Time
Configuring the Router 4-7