What To Do After Installing The Hardware - Cisco MWR 1900 Hardware Installation Manual

What to Do After Installing the Hardware

Router# cd slot0:/config
Router# dir slot0:
Directory of slot0:/config/
1581
128094208 bytes total (121626624 bytes free)
Remove a Directory
To remove a directory from CF memory, use the rmdir slot0:/directory-name command.
Before you can remove a directory, all files and subdirectories must be removed from the directory.
The following example shows output for displaying the contents of an external CF card, then removing
the subdirectory named test-config:
Router# dir slot0:
Directory of slot0:/config/
1581
128094208 bytes total (121626624 bytes free)
Router# rmdir slot0:/config/test-config
Remove directory filename [/config/test-config]?
Delete slot0:/config/test-config? [confirm]
Removed dir slot0:/config/test-config
Router# dir slot0:
Directory of slot0:/config/
No files in directory
128094208 bytes total (121630720 bytes free)
Enter a Directory and Determine the Current Directory
To enter a directory in CF memory, use the cd slot0:/directory-name command. To determine which
directory you are in, use the pwd command.
The following example shows output for the following actions:
•
•
Router# cd slot0:
Router# pwd
slot0:/

What to Do After Installing the Hardware

When you have installed the router hardware, see the Cisco MWR 1900 Software Configuration Guide
included in your router package for initial software configuration information.
Cisco MWR 1900 Mobile Wireless Edge Router Hardware Installation Guide
3-16
drw- 0 Mar 01 1993 23:50:08
drw- 0
Entering the home directory of a CF memory card in an external slot (slot0:/)
Verifying that you are in the slot0:/ directory
test-config
Mar 01 1993 23:50:08 test-config
Chapter 3 Installing the Router
78-13982-02