What To Do After Installing The Router Hardware - Cisco 2611 - Router - EN User Manual

What to Do after Installing the Router Hardware

Figure 3-16 Connecting a Modem
Modem cable
What to Do after Installing the Router Hardware
After you have installed the router, connect the power cable to the rear panel of the router
and the power source, and then power it ON. (If the router does not power on, proceed to
Appendix A "Troubleshooting the Router.")
Use the Software Configuration Guide (for Cisco 3600 series and Cisco 2600 series routers)
included in your router package for initial software configuration information.
3-22 Cisco 2600 Series Hardware Installation Guide
SERIAL 1
SERIAL 1 Cisco 2611
SERIAL 0
CONN WIC
SERIAL 0
CONN 2A/S
CONN WIC
CONN 2A/S
SEE MANUAL BEFORE INSTALLATION
SEE MANUAL BEFORE INSTALLATION
W0
LINK
ETHERN ET 1
ACT LINK ETHERN ET 0 ACT
CONSOL E
AUX
AUX port (RJ-45)
RJ-45-to-DB-25 adapter
EIA/TIA-232
100-240V – 1A
50/60 Hz 47 W
Modem