Connecting The Dc Power Supply - Cisco 2600 Series Hardware Installation Manual

Chapter 3 Installing the Router

Connecting the DC Power Supply

Figure 3-18 Mounting the Chassis on the Wall

Connecting the DC Power Supply

Cisco 261x, Cisco 262x, Cisco 26xxXM, and Cisco 265x series routers offer an optional DC power
supply. This section describes the DC power supply specifications and wiring.
Warning This unit is intended for installation in restricted access areas. A restricted access area is where
access can only be gained by service personnel through the use of a special tool, lock and key, or
other means of security, and is controlled by the authority responsible for the location. To see
translations of the warnings that appear in this publication, refer to the Regulatory Compliance
and Safety Information document that accompanied this device.
Cisco 2600 Series Routers Hardware Installation Guide
3-12
OL-2171-02