Connecting The Dc Power Supply - Cisco 2611 - Router - EN User Manual

Connecting the DC Power Supply

Connecting the DC Power Supply
Some router models offer an optional DC power supply. This section describes the DC
power supply specifications and wiring.
Warning
access area is where access can only be gained by service personnel through the use of a
special tool, lock and key, or other means of security, and is controlled by the authority
responsible for the location.
DC Power Specifications
The DC power supply is intended for use in DC-operating environments. Table 3-1 lists the
power supply specifications.
Table 3-1
Description
Power (input)
Wire gauge for power connections 14 AWG
1 AWG = American Wire Gauge.
3-10 Cisco 2600 Series Hardware Installation Guide
This unit is intended for installation in restricted access areas. A restricted
DC Power Supply Specifications
Design
Specification
65W, –40 to –72 VDC
1