TRENDnet TV-IP400 User Manual page 85

Q: What network cabling is required for the camera?
A: The camera uses Category 5 UTP cable allowing 10 Base-
T and 100 Base-T networking.
Q: Can the camera be setup as a PC-cam on the computer?
A: No, the camera is an Internet Camera used only on
Ethernet and Fast Ethernet network and supported by wireless
transmission.
Q: Can the camera be connected on the network if it consists of
only private IP addresses?
A: The camera can be connected to LAN with private IP
addresses.
Q: Can the camera be installed and work if a firewall exists on
the network?
A: If a firewall exists on the network, port 80 is open for
ordinary data communication. However, since the camera
transmits image data, the default port 8481 is also required.
Therefore, it is necessary to open port 8481 of the network for
remote users to access the camera.
84