TRENDnet TV-IP400 User Manual page 34

intercepted communications extremely difficult to
interpret by unauthorized parties.
setting for this option is Disable.
WEP Key Length: Select the proper setting for
WEP Encryption. In general, a larger key length
creates a stronger cipher. The default is 64-bits.
WEP Key Format: To enable WEP Encryption, you
should decide the encryption format first by selecting
the ASCII or HEX option, and then input the WEP
key (in the following Key 1~4 box).
ASCII input format:
ASCII format causes each character you type to be
interpreted as an eight-bit value. All unaccented upper-
and lower-case Western European characters that can be
input through your keyboard's typing zone are valid. To
setup a 64-bit WEP key, input 5 ASCII characters. For
example, '12345'. To setup a 128-bit WEP key, input 13
ASCII characters. For example, '1234567890123'. These
character counts result in bit counts of 40 and 104
respectively; the camera will automatically pad your input
to a bit count of 64 or 128.
HEX input format:
Hex format causes each pair of characters you type to be
interpreted as an eight-bit value in hexadecimal (base 16)
notation. Only the digits 0 through 9 and the letters A
through F (in upper or lower case) are valid. To setup a
64-bit WEP key, input 10 HEX format.
'3132333435', which is the same with ASCII input '12345'.
To setup a 128-bit WEP key, input 26 HEX format. For
example, '31323334353637383930313233', which is the
same with ASCII input '1234567890123'. These character
counts result in bit counts of 40 and 104, respectively; the
camera will automatically pad your input to a bit count of
64 or 128.
33
The default
For example,