TRENDnet TV-IP400 User Manual page 27

- System Setting: In this field, you can configure the
basic information of your camera.
Camera Name: This field is used to enter a
descriptive name for the device. The default setting
for the Camera Name is CS-xxxxxx, where xxxxxx is
the last six digit of the MAC Address. The
maximum length is 32 (printable ASCII).
Location: This field is used to enter a descriptive
name for the location used by the camera (optional).
Admin: This field is used to enter the administrator
name along with the password to access the System
Administration settings. Be sure to enter the
password twice to confirm the details once in the
Admin Password field and again in the Confirm
Password field.
26