TRENDnet TV-IP400 User Manual page 32

- Wireless Interface
Connection Mode: Use this option to determine the
type of wireless communication for your camera.
There are two choices of Infrastructure mode and Ad-
Hoc mode. The default setting is Infrastructure.
SSID: The SSID (Service Set Identifier) is the name
assigned to the wireless network. It will auto-detect
and display the SSID of wireless network connected
in this box (it displays default initially). This default
setting will let the camera connect to ANY access
point under the infrastructure network mode.
To connect the camera to a specific access point on the
network, please make sure to set the SSID of the
camera to correspond with the access point's SSID for
communication. Type any string up to 32 characters
long (spaces, symbols, and punctuation are not
allowed) in the Network Name box.
To connect the camera to an Ad-Hoc wireless
workgroup, make sure to set the same wireless channel
and SSID to match with the PC/Notebook's
configuration for direct wireless communication.
31