Technical Data - FireAngel Multisensor Plus Operating Instructions Manual

Technical data

Version
Type
Sensors
Function check
Acoustic alert
Environment and permeability check
Alarm conditions for CO detector
OPERATING INSTRUCTIONS
Multisensor Plus
Techem Smart System remote inspec-
table alarm Type C, in accordance with
DIN 14676-1
Ì Smoke detection:
Photo-optical scattered light method
Ì Heat detection:
Thermistor (Class A1)
Ì CO-detection:
Carbon monoxid sensor (Type B)
Ì Temperature and relative
humidity measurement:
Temperature/humidity sensor
Ì Automatic, remotely retrievable via radio interface (not perceptible)
Ì Manual, via user button operation
Ì In case of fire/carbon monoxide alarm: at least 85 dB(A)
Ì In case of manual test: approximately 75 dB(A)
Ì In case of fault indication: approximately 75 dB(A)
Ì Regular and automatic checks
Ì Covers
Ì Obstacles within 50 cm of the device
For CO exposure:
Ì 50 ppm: between 60–90 minutes
Ì 100 ppm: between 10–40 minutes
Ì 300 ppm or more: within 3 minutes
Multisensor Plus Kitchen
Techem Smart System remote inspec-
table alarm Type C
Ì Heat detection:
Thermistor (Class A1)
Ì CO-detection:
Carbon monoxid sensor (Type B)
Ì Temperature and relative
humidity measurement:
Temperature/humidity sensorr
-
25