Download Print this page

FireAngel Multisensor Plus Operating Instructions Manual page 24

Multifunctional radio, smoke, heat & carbon monoxide detector

Advertisement

The Multisensor Plus measures relative humidity and room
temperature with sensors. The device uses these readings
to signal if there is prolonged excessive relative humidity. An
orange LED on the device front then displays a ventilation
advice alert to help prevent potential mold growth.
It is possible to receive even more precise advice for optimal
room climate through value-added services. The Multisen-
sor Plus is used as a room climate sensor for this purpose.
You can activate or deactivate the collection and transmis-
sion of your room climate data, as well as the signaling of the
ventilation advice on the device.
Double-clicking (pressing the user button twice briefly)
starts the configuration mode.
You automatically start in the configuration of climate
data collection. Here, you can choose whether the Multi-
sensor Plus should collect and transmit your climate data
for analysis or not.
If data collection and transmission are turned on, the yellow
LED with the
- symbol blinks for 0.5 seconds. If data col-
lection and transmission are turned off, it blinks for only 0.1
seconds, which is noticeably shorter.
You can toggle the „on/off" setting by holding the user but-
ton for 3 seconds.
-
24
You can access the ventilation advice configuration by dou-
ble-clicking the user button again. Here, you can choose
whether the Multisensor Plus should provide ventilation tips
by lighting up the orange LED. This function is available
even if the transmission of climate data is turned off.
If the ventilation recommendation is turned on, the orange
LED
blinks for 0.5 seconds. If it is turned off, it blinks for
only 0.1 seconds, which is significantly shorter.
You can change the setting by holding the user button for 3
seconds.
To exit the configuration mode and save the setting: Press
the user button briefly.
If no button is pressed for 60 seconds, you automatically
exit the configuration mode and your last setting is saved.
You can restart the process at any time.
MULTISENSOR PLUS

Advertisement

loading
Need help?

Need help?

Do you have a question about the Multisensor Plus and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Multisensor plus kitchen580200580250