Table of Contents
Advertisement
3. Configure the Access Point
Note:
1. It is recommended that you configure the Access Point from a wired computer. Before the Access
Point can be configured, your network must be in a subnet of 192.168.10.x or a Static IP address
must be assigned to your computer's network adapter in the subnet of 192.168.10.x. Since the
Access Point's default IP address is 192.168.10.100, make sure no other network devices are
assigned an IP address of 192.168.10.100.
2. Disable any anti-virus and firewall programs before configuring the access point.
3. To protect your network from any unauthorized access it is recommended to enable wireless
encryption. Please refer to the user guide for more information.
1. Open your web browser, type the IP address of Access Point in the address bar, and then press
Enter. The default IP address is 192.168.10.100.
2. Enter the User name and Password, and then click OK. By default:
User Name: root
Password: root
3. Click Wizard.
4. Follow the setup wizard instructions and then click Finish.
Your configuration is now complete
For detailed information regarding the TEW-676APBO's configuration and advanced settings, please refer to the User's Guide
included on the CD-ROM, or TRENDnet's website at http://www.trendnet.com.
4
Advertisement
Table of Contents
