Configure The Access Point - TRENDnet TEW-455APBO Quick Installation Manual

3. Configure the Access Point

Note:
1. It is recommended that you configure the Access Point from a wired computer.
Before the Access Point can be configured, a Static IP address must be assigned to
your computer's network adapter in the subnet of 192.168.10.x. Since the Access
Point's default IP address is 192.168.10.100, make sure no other network devices
are assigned an IP address of 192.168.10.100. (Refer to Troubleshooting section on
how to configure TCP/IP settings on your PC.)
2. Disable any anti-virus and firewall programs before configuring the access point.
1. Open your web browser, type the IP address
of Access Point in the Address bar, and then
press Enter. The default IP address is
192.168.10.100.
2. Enter the User name and Password, and then
click OK. By default:
User Name: root
Password: root
3. Click System -> LAN.
6