Connecting the Ethernet Cable
1. Unscrew the sealing nut from the cable gland.
2. Separate the rubber seal from the claw.
3. Verify that you have the following parts: Cable Gland, Seal, Claw, Sealing Nut.
Cable Gland
Seal
Claw
Sealing Nut
4. In the following order insert one end of an Ethernet cable into the sealing nut, seal/rubber, claw and
finally through the cable gland.
5. Connect the Ethernet Cable to the PoE port on the rear of the TEW-676APBO.
6. Using your hand, screw the seal nut counter clockwise to secure it to the cable gland.
2