TRENDnet TEW-637AP Quick Installation Manual
Hide thumbs
Also See for TEW-637AP:
- User manual (49 pages) ,
- Manual (43 pages) ,
- Quick installation manual (11 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for TRENDnet TEW-637AP
Summary of Contents for TRENDnet TEW-637AP
- Page 1 Quick Installation Guide TEW-637AP 3.01...
- Page 2 Table of Contents English 1. Before You Start 2. Hardware Installation Troubleshooting Version 04.19.2011...
- Page 3 1. Before You Start Package Contents Ÿ TEW-637AP Ÿ Multi-Language Quick Installation Guide Ÿ CD-ROM (Utility and User's Guide) Ÿ Power Adapter (12V DC, 0.5A) Ÿ Network Cable (0.6m / 2ft.) System Requirements Web Browser: Internet Explorer (6 or higher), Firefox 2.0 or higher, Opera, Ÿ...
- Page 4 2. Hardware Installation Note: 1. Locate an optimum location for the Access Point. The best place for the Access Point is usually at the center of your wireless network. 2. Disable any anti-virus and firewall programs before starting hardware installation. For Windows Users 1.
- Page 5 5. Connect the provided network cable from a LAN port on your Router to the LAN port on the TEW-637AP. Then click Next. 6. Connect a RJ-45 cable from a LAN port on your Router to the Ethernet port on your computer. 7.
- Page 6 10. Select Dynamic IP Address Configuration and then click Next. 11. Select Manual setup and then click Next. 12. Enter a SSID (Wireless Network Name) and then click Next. By default, the SSID is TRENDnet637. The SSID is the wireless network name of your wireless network (e.g.
- Page 7 Note: 1. To protect your network from any unauthorized access it is recommended to enable wireless encryption. 2. The example below is for WPA-PSK/WPA2-PSK (AES) security. If you select WPA-PSK or WPA2-PSK, make sure your wireless adapters support WPA or WPA2. If your wireless adapters do not support WPA or WPA2, then select WEP.
- Page 8 Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at http://www.trendnet.com. Register Your Product To ensure the highest level of customer service and support, please take a moment to www.trendnet.com/register register your product Online at: Thank you for choosing TRENDnet...
- Page 9 Troubleshooting 1. All the settings are correct, but I can not make a wireless connection to the Access Point. Double check that the wireless LED on the Access Point is lit. 2. Power cycle the Access Point. Unplug the power to the Access Point. Wait 15 seconds, then plug the power back in.
- Page 10 (EU Version only) Reset Button Hold 15 seconds to reset device to factory defaults. WPS Button Hold 3 seconds to activate WPS If you still encounter problems or have any questions regarding the TEW-637AP, please contact TRENDnet's Technical Support Department.
- Page 11 Wireless Tips The following are some general wireless tips to help minimize the impact of interference within an environment. Assign your network a unique SSID Do not use anything that would be identifying like “Smith Family Network”. Choose something that you would easily identify when searching for available wireless networks. Do not turn off the SSID broadcast The SSID broadcast is intended to be on and turning it off can cause connectivity issues.
- Page 12 3. Building materials can have a large impact on your wireless signal. In an indoor environment, try to position the wireless devices so that the signal passes through less dense material such as dry wall. Dense materials like metal, solid wood, glass or even furniture may block or degrade the signal.
- Page 15 Copyright © 2011. All Rights Reserved. TRENDnet.