3. Configure the Access Point
Note:
1. It is recommended that you configure the Access Point from a wired computer. Before
the Access Point can be configured, a Static IP address must be assigned to your
computer's network adapter in the subnet of 192.168.10.x. Since the Access Point's
default IP address is 192.168.10.100, make sure no other network devices are
assigned an IP address of 192.168.10.100. (Refer to Troubleshooting section on how
to configure TCP/IP settings on your PC.)
2. Disable any anti-virus and firewall programs before configuring the access point.
1. Open your web browser, type
http://192.168.10.100 in the Address bar, and
then press Enter.
2. Enter the User Name and
Password, and then click OK. By default:
User Name: admin
Password: admin
3. Click Wizard.
4. Click Next.
3