Advertisement
3. Configure the Access Point
Note: It is recommended that you configure the Access Point from a computer
connected to a Powerline Ethernet Bridge (e.g. TPE-202E). Before the Access
Point can be configured, a Static IP address must be assigned on your
computer's network adapter in the subnet of 192.168.1.x. Since the Access
Point's default IP address is 192.168.1.200, make sure no other network
devices are assigned an IP address of 192.168.1.200. (Refer to the
Troubleshooting section on how to configure TCP/IP settings on your PC)
From a Powerline Computer
1. The default HomePlug Group
Name (Powerline network name) is
HomePlug. You must set your
Powerline bridge adapter's
Powerline network name to
HomePlug. Refer to your
Powerline bridge adapter's user
guide for instructions.
2. Open your web browser, type
http://192.168.1.200 in the
Address bar, and press Enter.
3. Enter User name and Password,
and then click OK. By default,
User name: admin
Password: admin
3
English
Advertisement
