1. Before You Start
Package Contents
Ÿ
TEW-676APBO
Ÿ
CD-ROM (User's Guide)
Ÿ
Multi-Language Quick Installation Guide
Ÿ
PoE Injector
Ÿ
Power Cord
Ÿ
Mounting Hardware
Ÿ
Waterproof Kit
Ÿ
Grounding wire
Note: The TEW-676APBO does not support IEEE 802.3af. You must use the special Power over
Ethernet injector that is supplied with the TEW-676APBO.
2. How to Install
Connecting the Grounding Wire
1. Remove the screw and washer from the grounding hole using a screwdriver. This is located on the
bottom of the TEW-676APBO.
2. Align one end of the grounding wire over the hole. Then connect the screw and washer back in.
3. Connect the green grounding wire to a grounding object. e.g. Earth Driven rod, Grounded Electrical
System, Building Frame.
Minimum Requirements
Ÿ
Web Browser: Internet Explorer (6.0 or
above)
Ÿ
A computer with a network adapter properly
installed
Ÿ
A network Switch or Router with an
available network LAN port
Ÿ
2 x RJ-45 network cables
Ÿ
Phillips screwdriver
1