Advertisement
LED Tail Lights for 1964-1966 rectangular Ford Pickup, 1967-1972 Ford Pickup, 1966-1977 Ford Bronco,
1965-1966 rectangular Ford Econoline, 1967-1974 Ford Econoline,
1960-1966 Chevrolet Stepside Pickup, 1971-1972 Chevelle
MAN#650215 rev. B
Kit Includes:
Installation:
1. Remove the screws and the tail light lens.
2. Remove the tail light bulb.
3. Now is a good time to clean or replace the lens and housing if necessary.
4. The new LED assembly will mount into the original light bulb socket. Push it into the socket
and turn it clockwise to lock it in.
5. Repeat for the other tail light.
6. Test the tail lights, brake lights, and turn signals. If the turn signals do not flash, you will need
to upgrade your flasher. If you are replacing only the rear turn signals you should be able to
use a heavy duty electronic flasher from your local parts store. If you are replacing both front
and rear or do not have front bulbs you will need a no-load flasher, Dakota Digital part number
LAT-NLF.
INSTALLATION INSTRUCTIONS
LAT-NR370
MAN#650215:B
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dakota Digital LED Tail Lights LAT-NR370
Summary of Contents for Dakota Digital LED Tail Lights LAT-NR370
- Page 1 If you are replacing only the rear turn signals you should be able to use a heavy duty electronic flasher from your local parts store. If you are replacing both front and rear or do not have front bulbs you will need a no-load flasher, Dakota Digital part number LAT-NLF.
- Page 2 This Warranty is in lieu of all other expressed warranties or liabilities. Any implied warranties, including any implied warranty of merchantability, shall be limited to the duration of this written warranty. No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with the sale of this product.
Need help?
Do you have a question about the LED Tail Lights LAT-NR370 and is the answer not in the manual?
Questions and answers