Advertisement
Quick Links
MAN#650154
Kit Includes:
Installation:
Remove the tail light lens.
1.
Remove the light bulb.
2.
Remove the original bulb connector from the back side of the housing.
3.
Now is a good time to clean or replace the lens and housing if necessary.
4.
Remove the two screws and aluminum plate from the back of the new LED assembly.
5.
INSTALLATION INSTRUCTIONS
LAT-NR120
LED Tail Lights for '62-'64 Nova
Advertisement
Related Manuals for Dakota Digital LED Tail Lights LAT-NR120
Summary of Contents for Dakota Digital LED Tail Lights LAT-NR120
- Page 1 MAN#650154 Kit Includes: Installation: Remove the tail light lens. Remove the light bulb. Remove the original bulb connector from the back side of the housing. Now is a good time to clean or replace the lens and housing if necessary. Remove the two screws and aluminum plate from the back of the new LED assembly.
- Page 2 Insert the new LED assembly through the hole where the original bulb and connector were. Be careful when feeding the wires through to avoid damaging insulation. Feed the wires through the larger hole in the mounting plate. Guide the mounting plate to the bottom of the housing.
- Page 3 This Warranty is in lieu of all other expressed warranties or liabilities. Any implied warranties, including any implied warranty of merchantability, shall be limited to the duration of this written warranty. No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with the sale of this product.