Table of Contents
Advertisement
SNMP
SNMP (Simple Network Management Protocol) is only useful if you have a SNMP program on
your PC. To reach this screen, select SNMP in the Management section of the menu.
Data - SNMP Screen
General
SNMP
Read Only com-
munity
Read/Write Com-
munity
SNMPv3
User Name
Authentication
Protocol
Authentication
Key
Private Protocol
Private Key
Managers
Any Station
Only this station
Figure 59: SNMP Screen
Use this to enable or disable SNMP as required
Data can be read, but not changed.
Data can be read, and setting changed.
Enter the user name for SNMPv3.
Select the authentication protocol used by SNMPv3.
Enter the authentication key required by SNMPv3.
Select the private protocol as required.
Enter the private key here.
The IP address of the manager station is not checked.
The IP address is checked, and must match the address you enter in
the IP address field provided.
If selected, you must enter the IP address of the required station.
Access Point Management
71
Advertisement
Table of Contents
