Table of Contents
Advertisement
Wireless Access Point User Guide
•
WPS Support.
device to the wireless network by using the push button configuration (PBC) on the Wire-
less Access Point, or entering a 8-digit PIN code if there's no button.
•
DHCP Client Support.
address to PCs and other devices upon request. The Wireless Access Point can act as a
DHCP Client, and obtain an IP address and related information from your existing DHPC
Server.
•
Upgradeable Firmware.
easily, using only your Web Browser.
Security Features
•
Virtual APs.
Up to 4 Virtual APs can be defined and used as any time.
•
Multiple BSSIDs.
Virtual APs can be active simultaneously, multiple SSIDs are supported. Different clients
can connect to the Wireless Access Point using different SSIDs, with different security set-
tings.
•
Virtual APs Isolation.
can be isolated from each other.
•
VLAN Support.
ent sources to be segmented. Combined with the multiple SSID feature, this provides a
powerful tool to control access to your LAN.
•
WEP support.
128 Bit, and 152 Bit keys are supported.
•
WPA support.
be used if possible. Both TKIP and AES encryption methods are supported.
•
802.1x Support.
strength wireless security of 802.1x authentication and authorization.
•
Radius Client Support.
Server (as a Radius client).
•
Radius MAC Authentication.
MAC addresses by using a Radius Server.
•
Rogue AP Detection.
Access Points on your LAN.
•
Access Control.
clients to ensure that only trusted Wireless Stations can use the Wireless Access Point to
gain access to your LAN.
•
Password - protected Configuration
prevent unauthorized users from modifying the configuration data and settings.
Advanced Features
•
Command Line Interface.
configuration. This provides the possibility of creating scripts to perform common configu-
ration changes.
•
Radius Accounting Support.
accounting data on Wireless clients.
•
Syslog Support.
data to your Syslog Server.
WPS (Wi-Fi Protected Setup) can simplify the process of connecting any
Dynamic Host Configuration Protocol provides a dynamic IP
Firmware is stored in a flash memory and can be upgraded
For maximum flexibility, wireless security settings are stored in Virtual AP.
Because each Virtual AP has it own SSID and beacon, and up to 4
If desired, PCs and devices connecting to different Virtual APs
The 802.1Q VLAN standard is supported, allowing traffic from differ-
Support for WEP (Wired Equivalent Privacy) is included. Both 64 Bit
Support for WPA is included. WPA is more secure than WEP, and should
Support for 802.1x mode is included, providing for the industrial-
The Wireless Access Point can login to your existing Radius
You can centralize the checking of Wireless Station
The Wireless Access Point can detect unauthorized (Rouge)
The Access Control feature can check the MAC address of Wireless
If desired, the command line interface (CLI) can be used for
If you have a Radius Server, you can use it to provide
If you have a Syslog Server, the Wireless Access Point can send its log
. Optional password protection is provided to
2
Advertisement
Table of Contents
