Table of Contents
Advertisement
Wireless Access Point User Guide
Change Admin Password
New Password
Repeat New Password
Admin Connections
Enable HTTP
HTTP Port Number
Enable HTTPS
HTTPS Port Number
Enable Management via
Telnet
If you wish to change the Admin password, check this field
and enter the new login password in the fields below.
Enter the desired login password.
Re-enter the desired login password.
Enable this to allow admin connections via HTTP. If enabled,
you must provide a port number in the field below. Either
HTTP or HTTPS must be enabled.
Enter the port number to be used for HTTP connections to this
device. The default value is 80.
Enable this to allow admin connections via HTTPS (secure
HTTP). If enabled, you must provide a port number in the
field below. Either HTTP or HTTPS must be enabled.
Enter the port number to be used for HTTPS connections to
this device. The default value is 443.
If desired, you can enable this option. If enabled, you will able
to connect to this AP using a Telnet client. You will have to
provide the same login data (user name, password) as for a
HTTP (Web) connection.
66
Advertisement
Table of Contents
