Table of Contents
Advertisement
Data - WEP Screen
WEP
Data
Encryption
Authentication
Key Input
Key Value
Passphrase
Select the desired option, and ensure your Wireless stations have the
same setting:
•
64 Bit Encryption - Keys are 10 Hex (5 ASCII) characters.
•
128 Bit Encryption - Keys are 26 Hex (13 ASCII) characters.
•
152 Bit Encryption - Keys are 32 Hex (16 ASCII) characters.
Normally, you can leave this at "Automatic", so that Wireless Stations
can use either method ("Open System" or "Shared Key".).
If you wish to use a particular method, select the appropriate value -
"Open System" or "Shared Key". All Wireless stations must then be set
to use the same method.
Select "Hex" or "ASCII" depending on your input method. (All keys
are converted to Hex, ASCII input is only for convenience.)
Enter the key values you wish to use. The default key, selected by the
radio button, is required. The other keys are optional. Other stations
must have matching key values.
Use this to generate a key or keys, instead of entering them directly.
Enter a word or group of printable characters in the Passphrase box and
click the "Generate Key" button to automatically configure the WEP
Key(s).
Access Point Setup
23
Advertisement
Table of Contents
