Wireless - Wireless Mac Filter - TRENDnet TEW-511BRP User Manual

4.7 Wireless – Wireless MAC Filter
This function allows administrator to have access control by enter MAC address of wireless devices which transmitting
within your wireless network.
Wireless MAC Filter
Access Restrictions
This policy can effectively control each wireless device using the wireless network. Enable this function to filter wireless
devices by MAC Address, either permitting or blocking access. If you do not want to filter users by MAC Address, select
Disabled.
Prevent PCs listed below from accessing the wireless network: Select this option will block selected wireless client
by MAC address.
Permit PCs listed below to access the wireless network: Select this option will permit selected wireless client by
MAC Address.
Wireless Client List
Wireless Client List: Click the Wireless Client MAC List button to display a list of wireless clients by MAC Address.
From the To Sort by drop-down menu, you can sort the table by Client Name, Interface, IP Address, MAC Address. If
you want to add any of the wireless clients to the Wireless MAC Filter List, then click the On the List checkbox and
then click the Save Settings button. Click the Cancel Changes button to cancel your changes. To view the most
updated information, click the Refresh button. To exit this screen, click the Close button.
Change these settings as described here and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes. For additional information, click Help.
User's Guide 17