Wireless 2.4Ghz Wireless Settings - TRENDnet TEW-812DRU User Manual

TRENDnet User's Guide
• PIN (Personal Identification Number) Method - located in router management page
Note: Refer to your wireless device documentation for details on the operation of
WPS.
Recommended Hardware Push Button (PBC) Method
• Note it is recommended that a wireless key (passphrase or password) is created
before connecting clients using the PBC method. If no wireless key is defined when
connecting via PBC, the router will automatically create an encryption key that is 64
characters long. This 64 character key will then have to be used if one has to
connect computers to the router using the traditional connection method.
To add a wireless device to your network, simply push the WPS button on the wireless
device you are connecting(consult client device User's Guide for length of time), then
push and hold the WPS button located on your router for 3 seconds and release it. A
blue LED on your router WPS button will flash indicating that the WPS setup process has
been activated on your router. (See "Product Hardware
For connecting additional WPS supported devices, repeat this process for each
additional device.
PBC (Software/Virtual Push Button)
Wireless >WiFi Protected Setup
In addition to the hardware push button located physically on your router, the router
management page also has push button which is a software or virtual push button you
can click to activate WPS on your router.
1. Log into your router management page (see
on page 26).
2. Select the wireless band you would like to configure and click on WPS.
3. To add a wireless device to your network, simply the push the WPS button on the
wireless device (consult wireless device's User's Guide for length of time), you are
© Copyright 2013 TRENDnet. All Rights Reserved.
Features" on page 5)
"Access your router management page"
connecting, then in your router management page under WPS action click on the Add
Enrollee button.
PIN (Personal Identification Number)
Wireless >WiFi Protected Setup
If your wireless device has WPS PIN (typically an 8-digit code printed on the wireless
device product label or located in the wireless device wireless software utility), you can
use this method.
1. Log into your router management page (see
on page 26).
2. Select the wireless band you would like to configure and click on WPS.
3. Next to Station PIN, enter the WPS PIN of the wireless device you are connecting and
click the Add Enrollee button.
Note: You may need to initiate the WPS PIN on your wireless device first when using
this method. Refer to your wireless device documentation for details on the
operation of WPS.

Wireless 2.4GHz wireless settings

2.4GHz Wireless > Basic
This section outlines available management options for your router's 2.4GHz wireless
network.
1. Log into your router management page (see
on page 26).
2. Click on Wireless 2.4GHz and click on Basic.
TEW-812DRU
"Access your router management page"
"Access your router management page"
17