Administration - Log - TRENDnet TEW-511BRP User Manual

4.16 Administration – Log
The Router can keep logs of all traffic for your Internet connection. This feature is disabled by default. To keep activity
logs, select Enable.
Log
To disable the Log function, keep the default setting, Disabled. To monitor traffic between the network and the Internet,
select Enabled.
Logviewer IP Address: For a permanent record of the Router's activity logs, Logviewer software must be used.
This software can be gotten from CD. The Log viewer saves all incoming and outgoing activity in a permanent file on
your PC's hard drive. In the Logviewer IP Address field, enter the fixed IP address of the PC running the Log viewer
software. The Router will now send updated logs to that PC.
View Log: When you wish to view the logs, click View Log. A new screen will appear. Select Incoming Log or
Outgoing Log from the Type drop-down menu. The Incoming Log will display a temporary log of the Source IP
Addresses and Destination Port Numbers for the incoming Internet traffic. Click the Save the Log button to save this
information to a file on your PC's hard drive. Click the Refresh button to update the log. Click the Clear button to clear
all the information that is displayed.
The Outgoing Log will display a temporary log of the LAN IP Addresses, Destination URLs or IP Addresses, and
Service or Port Numbers for the outgoing Internet traffic. Click the Save the Log button to save this information to a file
on your PC's hard drive. Click the Refresh button to update the log. Click the Clear button to clear all the information
that is displayed.
Change these settings as described here and click the Apply button to apply your changes or click Cancel to cancel your
changes. For additional information, click Help.
User's Guide 31