Mac Filter (Wireless) - TRENDnet TEW-813DRU User Manual

TRENDnet User's Guide

MAC Filter (Wireless)

Advanced > Wireless (2.4GHz or 5GHz) > MAC Filter
This MAC filter is dedicated to filter on each band and each SSID. Every network device
has a unique, 12-digit MAC (Media Access Control) address. Every network device must
be assigned or configured with a specific IP address in order to communicate with your
network which is typically assigned by your router DHCP server automatically. Using
access rules, you can deny specific computers and other devices from using this router's
wired or wireless network by specifying the MAC address or IP address.
1. Log into your router management page (see
on page 9).
2. Click on Advanced and click on Wireless (2.4GHz or 5GHz), then click on MAC Filter.
3. Review the MAC Filter options. Click Apply to save settings.
• Select SSID – If you have multiple SSIDs configured, click the drop-down list to
select which SSID to apply the MAC filter.
• Wireless MAC Filter
Filter Mode
o
 Disabled – disables MAC address filter.
Allow listed computers and deny all others: Selecting this

function allows computers/devices with MAC addresses listed
to access the local network (LAN/WLAN), web management,
and the Internet.
Deny listed computers and allow all others: Selecting this

function denies computers/devices with MAC addresses
listed from access to the local network (LAN/WLAN), web
management, and the Internet.
MAC Address – Enter the MAC address of the wireless device to apply
o
to this filter.
© Copyright 2014 TRENDnet. All Rights Reserved.
"Access your router management page"
TEW-813DRU
20