Administration - Diagnostics - TRENDnet TEW-511BRP User Manual

4.17 Administration – Diagnostics
The diagnostics function provides two ways for Router's status of Internet connection.
Diagnostics
Ping Test
This utility verifies configurations and tests IP connectivity between two computers. Ping sends an ICMP request from
the source computer, and the destination computer responds with an ICMP reply.
To IP or URL Address: Enter the IP address or URL that you want to ping.
Packet Size: Enter the size of the packet you want to use.
Times to Ping: Select the number of times you wish to ping: 5, 10, 15, or Unlimited.
Start to Ping: Click this button to begin the test. A new screen will appear and display the test results. Click the
Close button to return to the Diagnostics screen.
Traceroute Test
Traceroute function provides a trace for the route that a packet takes to destination.
To IP or URL Address: Enter the destination IP address or URL that you want to trace the routes.
Start to Tracert: Click this button to begin the Tracert. A new screen will appear and display the trace results. Click
the
Close button to return to the Diagnostics screen.
Change these settings as described here and click the Apply button to apply your changes or click Cancel to cancel your
changes. For additional information, click Help.
User's Guide 32