Website Filter; Mac Filter (Wireless) - TRENDnet TEW-817DTR User Manual

TRENDnet User's Guide

Website Filter

Basic > Parental Control
You may want to block computers or devices on your network access to specific
websites (e.g. www.xxxxxxxxx.com, etc.), also called domains or URLs (Uniform Resource
Locators). You may also apply a schedule when these websites are allowed or denied.
1. Log into the management page (see
2. Click on Basic and click on Parental Control.
3. Under Website Filter, click the Website Filter drop-down list and choose one of the
following options.
 Disable: Disables website filtering.
 DENY computers access to ONLY these sites: Only Deny computers/devices access
to the listed websites and allow access to others.
 ALLOW computers access to ONLY these sites: Only Allow computers/devices
access to the listed websites and deny access to others.
4. Check Enable to enable the access rule.
5. Enter a Rule Name.
6. Enter a URL (ex. www.xxxxxxxx.com) to apply for the filter or block
7. Schedule (Optional): The schedule function allows you to define a schedule when the
access should be active and blocking the specified website. To define a new schedule,
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access your management page" on page 7).
click New Schedule and refer to page 30
new schedule, click the drop-down list and the new schedule will be available for
selection.
Note: Before applying scheduling, please ensure your Time settings are configured
correct and you have defined a schedule. See page 29 to configure
page 30 "Create Schedules" to create a schedule.
8. Click Add to add the access rule to the Access Rule List. Wait of the rule to be added.
Note: Clicking Reset will discard your settings and clear all fields.
Note: In the URL Fille List, you can edit a rule by clicking
next to the rule you would like to edit. You can also delete a rule by clicking
the Delete column next to the rule you would like to delete.

MAC Filter (Wireless)

Advanced > Wireless (2.4GHz or 5GHz) > MAC Filter
This MAC filter is dedicated to filter on each band and each SSID. Every network device
has a unique, 12-digit MAC (Media Access Control) address. Every network device must
be assigned or configured with a specific IP address in order to communicate with your
network which is typically assigned by your router DHCP server automatically. Using
access rules, you can deny specific computers and other devices from using this router's
wired or wireless network by specifying the MAC address or IP address.
1. Log into the management page (see
2. Click on Advanced and click on Wireless (2.4GHz or 5GHz), then click on MAC Filter.
3. Review the MAC Filter options. Click Apply to save settings.
 Select SSID: If you have multiple SSIDs configured, click the drop-down list to select
which SSID to apply the MAC filter.
 Wireless MAC Filter
o Filter Mode
 Disabled: Disables MAC address filter.
TEW-817DTR
"Create Schedules". After you have created a
Time Settings
under the Edit column
"Access your management page" on page 7).
and see
under
21