Hardware Installation For Connection To Your Broadband Modem - TRENDnet TEW-511BRP User Manual

Hardware Installation for Connection to Your Broadband Modem

1. Power off your network devices.
2. Locate an optimum location for the Router. The best place for the Router is usually at the center of your wireless
network, with line of sight to all of your wireless devices.
3. Adjust the antennas. Normally, the higher location of your Router will get better the performance.
4. Using a standard Ethernet network cable, connect the Router's Internet port to your broadband modem.
5. Connect your network PCs or Ethernet devices to the Router's LAN ports using standard Ethernet network cabling.
6. Connect the AC power adapter to the Router's Power port. Then connect the other end to an electrical outlet. Only
use the power adapter supplied with the Router. Use of a different adapter may cause product damage.
7. The Hardware installation is complete, please refer to the following content for Router configuration.
User's Guide 7