Status - Router - TRENDnet TEW-511BRP User Manual

4.20 Status – Router
The Router screen on the Status Tab displays information about the Router and its current settings. The Internet
Connection information will vary depending on the Internet Connection Type you use.
Router Information
Firmware Version: This is the Router's current firmware.
Current Time: This shows the time by the time zone you selected on the Setup Tab.
Internet MAC Address: This is the Router's MAC Address.
Host Name: If required by your ISP, it would be entered on the Setup Tab.
Domain Name: If required by your ISP, it would be entered on the Setup Tab.
Internet Connection
Connection Type: This indicates the current Internet connection type you are using.
Connection Status: The status of the connection is displayed only for a PPPoE connection type. For this dial-up style
connection, click the Connect button, if there is no connection to establish. When your PPPoE connection is active,
you can click the Disconnect button to end the connection.
IP Address: The Router's Internet IP Address.
Subnet Mask and Default Gateway: The Router's Subnet Mask and Default Gateway address are displayed here.
DNS1-3: The DNS (Domain Name System) IP addresses currently is used by the Router. The Router at least one DNS
IP should be used for domain name resolution.
IP Release: This button is for DHCP connection type, click this button to release the current Internet IP address.
IP Renew: This button is for DHCP connection type, click this button to renew the current Internet IP address.
Click the Refresh button to update the on-screen information.
User's Guide 35