Setup - Basic Setup - TRENDnet TEW-511BRP User Manual

4.1 Setup – Basic Setup
MAKE CORRECT NETWORK SETTINGS OF YOUR COMPUTER
To change the configuration, use Internet Explorer (IE) or Netscape Communicator to connect the WEB management
192.168.1.1.
This following screen contains all of the Router's basic setup functions.
.
Most users will be able to configure the AP Router and get it working properly using the settings on this screen. Some
Internet Service Providers (ISPs) will require that you enter broadband specific information into this device, such as User
Name, Password, IP Address, Default Gateway Address, or DNS IP Address for Internet access. This information can be
obtained from your ISP, if required.
Internet Setup
Internet Connection Type:
♦
Automatic Configuration – DHCP
This' s default connection type. If your ISP supports DHCP assigning dynamic IP address then please select
this type.
♦
Static IP
If you are required to use a fixed IP address to connect to the Internet, then select Static IP.
Internet IP Address: This' s the Router's WAN IP address. Usually it will provide by your ISP, and need to
input here.
Subnet Mask: This' s the Router's Subnet Mask, Usually it will provide by your ISP, and need to input here.
Default Gateway: This' s the Router's Gateway Address, Usually it will provide by your ISP, and need to input
here.
DNS (1-3): Your ISP will provide you at least one DNS Server IP Address and need to input here.
User's Guide
9