TRENDnet TEW-455APBO User Manual page 67

Hostname : The Hostname of the WAN port
Static IP : Users can manually setup the WAN IP address with a static IP provided by WISP.
IP Address : The IP address of the WAN port. By default, the IP address is 192.168.1.254
IP Netmask : The Subnet mask of the WAN port. By default, the Netmask is 255.255.255.0
IP Gateway : The default gateway of the WAN port. By default, the Gateway is 192.168.1.1
PPPoE : To create wireless PPPoE WAN connection to a PPPoE server in network.
User Name : Enter User Name for PPPoE connection
Password : Enter Password for PPPoE connection
Reconnect Mode :
Always on – A connection to Internet is always maintained.
On Demand – A connection to Internet is made as needed.
When the "Reconnect Mode" is set to "On Demand", if the "System Time" NTP Client is enabled, the device's Reconnect
Mode would become "Always On"
Manual – Click the "Connect" button on "WAN Information" in the Overview page to connect to
the Internet.
Idle Time : Time to last before disconnecting PPPoE session when it is idle. Enter preferred Idle Time
in minutes.
MTU : By default, it's 1492 bytes. MTU stands for Maximum Transmission Unit. Consult with WISP for
a correct MTU setting.
TEW‐455APBO High Power Wireless Outdoor PoE Access Point
64
User Manual