Setup And Defaults - Disc Makers ReflexMax1 User Manual

drive. Pressing ENT will return to the Edit Track main menu.
8. Press ESC to return to the main menu and use the up arrow to change to 8
Select Source. Change to the hard drive for the source (see page 9) and then
use the arrows to go to 9. Image, press ENT then use the down arrow to get
to 9-05 Select Image to select the partition (see page 9) of the hard drive
that the compilation was moved to. Go to 1.Copy and copy the CD from the
hard drive.
11. Setup
The Setup function allows the user to specify specific parameters for copying
CDs. There are 16 sub items. From the main menu screen pressing ENT will
show the sub heading. Pressing the Up and Down arrows allows the user to
move between the settings.
11.01 Language: allows the user to set English or Spanish as the display lan-
guage.
11.02 Burn Speed: allows the user to change the speed at which the unit burns
a CD. By pressing the ENT button the current setting will be displayed.
The user can then press the Up and Down arrows to change to the
desired speed. Pressing the ENT button will set the speed. Press ESC to
go back to the main menu.
11.03 Read Speed: allows the user to change the speed at which the unit reads
a master CD. By pressing the ENT button, the current setting will be dis-
played. The user can then press the Up and Down arrows to change to
the desired speed. Pressing the ENT button will set the speed. Press ESC
to go back to the main menu.
11.04 Auto Start Drive set to On will start a copy function as soon as blank
media is detected in the writer drive. The default setting is Off.
11.05 Startup Menu allows the user to have the ReflexMax start up to any of
the first seven options in the main menu. The default setting is Copy.
11.06 Auto Verify set to On will do a verify after every copy is made. The
default setting is Off.
11.07 Auto Compare set to On will do a comparison after every copy is made.
The default setting is Off.
11.08 Auto PreScan set to On' will do a prescan on every CD placed in the read-
1-888-800-4041
er drive. The default setting is Off.
11.09 Eject Disc allows the user to choose what will happen at the end of
function. The three choices are: Eject Good Only, Eject All Disc, and Do
Not Eject. The eject option is only available on the Copy, Test and Copy,
Verify, and Compare functions. The default setting is Eject Good Only.
11.10 Burn on the Fly allows the user to burn an image of the master to the
hard drive then to blank media. The difference between this and loading
an image is that with Burn On The Fly set to Off the image will be imme-
diately erased after the write to the blank media. Set to On the ReflexMax
will write directly from Disc-to-Disc without sending an image to the
hard drive first. With Burn On The Fly set to Off. Safe will appear in the
upper right of the LCD display. The default setting is On.
11.11 Burn Mode allows the user to choose Disc-at-Once or Track-at-Once for
the burn function. The default setting is DAO Disc-at-Once.
11.12 Button Sound set to On will cause any pressing of the control buttons to
make a sound. The default setting is On.
11.13 Device Info has information on the writer and reader drives.
11.14 System Info has information on the controller of the ReflexMax.
11.15 Quick Erase erases the TOC of CD-RW discs.
11.16 Full Erase erases all the data on a CD-RW disc.
www.discmakers.com
T
12