Quick Select Function; Sleep Timer Function - Denon AVR-1712 Owner's Manual

Quick select function

It is also possible to save four settings for ZONE2.
n Saving the settings
1
Set the items below to the settings you want to save.
q Input source (vpage 45)
w Volume (vpage 45)
2
Press ZONE SELECT to switch the
K
zone mode to (ZONE2).
3
In the zone mode for which
you want to operate, press and
hold the desired QUICK SELECT
until "Memory" appears on the
display.
The current settings will be memorized.
GQuick select defaultsH
Input source
BD
ZONE2 QUICK SELECT 1
SAT/CBL
ZONE2 QUICK SELECT 2
ZONE2 QUICK SELECT 3 –
ZONE2 QUICK SELECT 4 DOCK
BD
n Recalling the settings
1
Press ZONE SELECT
K
zone mode to (ZONE2).
2
Press QUICK SELECT
the settings you want to call out
are saved.
Naming quick select settings
See "Quick Sel.Name" (vpage 66).
Volume
–40dB
–40dB
–
–40dB

Sleep timer function

This is useful when you want to sleep while listening in ZONE2.
1
to switch the
2
at which
• The time switches as shown below each
time
• If
remote control unit can be obtained.
To confirm the countdown time before putting the
unit to sleep
Press
"Z2 Sleep : zmin" appears on the display.
z Countdown time
To cancel the sleep timer
Press
The sleep timer is also canceled when this unit is set to the standby
mode or the ZONE2 power is turned off.
46
Press ZONE SELECT to switch the
K
zone mode to (ZONE2).
SLEEP
Press and display the time
you want to set.
SLEEP
is pressed.
OFF 10 min 20 30
120 100 90 80
110
SLEEP
on the main unit is pressed, the same function as with the
SLEEP
.
SLEEP
to set "OFF".
40 50
70 60