Specifying the zone used with the
main remote control unit
ZONE SELECT
When the
button is pressed, only the set zone can be
operated with the remote control unit.
1
ZONE/DEVICE Z
Press and hold
for at least 3 seconds.
The zone mode indicator flashes twice.
2
Press
ZONE SELECT
.
The zone mode indicator flashes twice.
3
Press
1 – 3
to set.
The zone mode indicator flashes twice.
[Settable items]
1 When only using "MAIN ZONE"
2 When using "MAIN ZONE" /
"ZONE2"
3 When using "MAIN ZONE" /
"ZONE2" / "ZONE3" (Default)
Resetting the remote control unit
Settings for the remote control unit are returned to the default values.
1
Press and hold
ZONE/DEVICE Z
for at least 3 seconds.
The zone mode indicator flashes twice.
2
9
8
1
Press
,
and
, in that order.
J indicator flashes four times.
All the settings are restored to their
defaults.
79