Playback (Basic Operation); Important Information; Selecting The Input Source - Denon AVR-1712 Owner's Manual

Playback (Basic operation)

Settings (vpage 13)
n Selecting the input source (vpage 20)
n Adjusting the master volume (vpage 21)
n Turning off the sound temporarily (vpage 21)
n Playing a Blu-ray Disc player/DVD player
(vpage 21)
n Playing a CD player (vpage 21)
n Playing an iPod ® (vpage 22)
n Tuning in radio stations (vpage 25)
Selecting a listening mode (Surround mode)
(vpage 27)
Playback (Advanced operation) (vpage 41)
BD

Important information

Before starting playback, make the connections between the different
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.

Selecting the input source

Press the input source select button
( BD , SAT/CBL , TV , DVD , V.AUX ,
DOCK TUNER GAME1 GAME2
, , , or
CD ) to be played back.
The desired input source can be selected
directly.
TUNER
• If the input source select button (
GAME 1/2 DVD DOCK CD V.AUX
, , , , ) on the main unit is pressed,
the same function as with the remote control unit can be obtained.
iPod 1
• When on the main unit is pressed, the input source of this
unit is switched to "DOCK" and the connected iPod is automatically
played (vpage 24 "iPod play function").
You can also use the following operation to select an input
source.
20
n Using the "Source Select" menu
Switch the remote control unit to the
performing this operation
If the remote control unit is in
Select" menu will not be displayed when
pressed.
Source Select
Player
BD
DVD
CD
DOCK
[ ] Move
BD SAT/CBL TV
, , , ,
SOURCE SELECT
q Press
Display the "Source Select" menu.
uio p
w Use to select the input source,
ENTER
then press
The input source is set and the source
selection menu is turned off.
• Input sources that are not going to be used can be set ahead of time.
Make this setting at "Source Delete" (vpage 65).
• To turn off the source selection menu without selecting an input
SOURCE SELECT
source, press
SOURCE SELECT
• When
automatically (vpage 74).
J
(MAIN ZONE) mode when
(vpage 74 "Operating AV devices").
K
(ZONE2) mode, the "Source
SOURCE SELECT
Video Tuner
SAT/CBL TUNER
TV
GAME1
The currently selected input
GAME2
source is highlighted.
V.AUX
[ENTER] Enter
.
.
again.
is pressed, the AMP-operation mode starts
is